Shipping throughout Russia and to other countries

Oil production control systems Bozna Standard, VORTEX, MAVIK, etc.

Standard oil samplers are designed for sampling oil and petroleum products from pipelines at an operating pressure of 0.2 to 6.3 MPa. The diameter of the bypass line is 50 mm.
The slot-type sampling device is designed for sampling oil and petroleum products from pipelines with a nominal diameter from 40 to 1200 mm and a pressure from 0.2 to 6.3 MPa and designed in accordance with GOST 2517-85 (amendment No. 1).
The tube-type sampling device is designed for sampling oil and petroleum products from pipelines with a nominal diameter from 80 to 400 mm and a pressure from 0.2 to 6.3 MPa and designed in accordance with GOST 2517-85 (amendment No. 1).
The VORTEX flow mixer is designed for mixing insoluble constituents of oil formations transported through pipelines with a pressure of up to 6.3 MPa.
The MAVIK-NS automatic sampler is designed to take samples of highly watered oil transported through pipelines with a pressure from 0.2 to 6.3 MPa according to a given program.
The MAVIK-NT automatic sampler is designed for sampling commercial oil and petroleum products transported through pipelines with a pressure from 0.2 to 6.3 MPa according to a given program.
The MAVIK-GJ automatic sampler is designed to take samples of easily evaporating petroleum products, liquefied gases and gas (gas products) transported through pipelines at an operating pressure of 0.2 to 6.3 MPa according to a given program.
The automatic sampler PROBA-1M is designed for sampling commercial oil transported through pipelines at an operating pressure from 0.2 to 6.3 MPa according to a given program. It is installed at commercial oil metering units for operational quality control of products. The sample is analyzed under laboratory conditions.
The BPU-A software control unit is designed to issue a set number of control commands to samplers with an electric motor or an electromagnet.
The BPU-A software control unit (R1BPU) is designed to issue a set number of control commands to a sampler with an electric motor or an electromagnet in manual and automatic modes.
The sampling probe is designed for sampling commercial oil transported through pipelines with a nominal diameter from 40 to 1200 mm and a pressure from 0.2 to 6.3 MPa.
The sliding mechanism for the sampling tube MVPT-A is designed for mechanized removal and installation of the sampling tube when performing preventive maintenance on its cleaning and inspection on an existing pipeline without stopping the oil transportation process (at an operating pressure of 6.3 MPa).

Questionnaire

All Bozna products

The group "New Technologies" offers for review the products of the plant Bozna: oil metering units, measuring lines, oil quality control units, block installations, turbine oil and gas meters
  • Measuring installations Bozna
    Measuring installations
    AGZU-120M, KTS-IU, etc.
  • Dosing units Bozna
    Dosing units
    BR, UDE, NDU, etc.
  • Flow meters Bozna
    Flow meters
    MASK, MIG, VEGA-03, etc.
  • Oil production control systems Bozna
    Oil production control systems
    Standard, VORTEX, MAVIK, etc.
  • Moisture meters Bozna
    Moisture meters
    VSN-2BN, etc.
  • Devices for measuring systems Bozna
    Devices for measuring systems
    MIG, BKN-O, etc.
  • Instruments for well research Bozna
    Instruments for well research
    PG-1000, SPI-01, KSP-4, etc.
  • Block-modular rooms Bozna
    Block-modular rooms
    Technological
  • Repair kits Bozna
    Repair kits
    URK, KR, etc.
  • Pneumatic motors Bozna
    Pneumatic motors
    PM-60, PM-250, PM-500, etc.
  • Motor pumps Bozna
    Motor pumps
    NMR-100, NMR-200, etc.
  • Rotary flow meters Bozna
    Rotary flow meters
    TOR-1M, etc.
  • Roller-blade counters Bozna
    Roller-blade counters
    ORS et al .
  • Magnetoinduction sensors Bozna
    Magnetoinduction sensors
    NORD-I1U, NORD-I2U, etc.
  • Electronics Bozna
    Electronics
    NORD-E3M et al.

About Bozna

BOZNA (Bugulma) is a machine-building enterprise specializing in the production of devices, automation tools and equipment for the oil and gas, energy and other industries.

  • FLOW MEASUREMENT

    Automated installations. Direct and indirect measurements. A wide range of measured products. High quality.

  • AUTOMATIC DOSING

    Production of equipment for automated preparation and dosage of demulsifiers and corrosion inhibitors.

  • research

    Production of equipment for well research. Various modifications. Individual requirements of the customer. Affordable prices.

Information Board Bozna

Learn more about our products Bozna.
  • Price list for products of the plant Bozna
    Price list for products
  • Questionnaire on moisture meters производства бозна
    Questionnaire on moisture meters
  • Questionnaire for samplers марки бозна
    Questionnaire for samplers
  • Questionnaire for dosing units марки бозна
    Questionnaire for dosing units
  • Questionnaire for flow meters в магазине бозна
    Questionnaire for flow meters
  • Questionnaire for ordering a measuring unit марки бозна
    Questionnaire for ordering a measuring unit

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: